Home/FlowTex Dewatering Technology • Manufactured in South Africa
FlowTex HF105
Published properties, selection guidance and a downloadable reference sheet for FlowTex HF105.
FlowTex HF105
Selected for your slurry. Manufactured for your project.
Compare for structural duties requiring the 105 / 105 kN/m reference fabric; confirm seams and geometry.
Product selection
Specifications that inform the right choice
Compare the published grades, then confirm the supplied construction and project requirements in the technical submission.
| FlowTex grade | Tensile MD/CD (kN/m) | O90 (µm) | Normal permeability (mm/s) | Mass (g/m²) |
|---|---|---|---|---|
| HF105 | 105 / 105 | 300 | 25 | 500 |
Technical notes and test basis
Nominal reference fabric values, subject to stated tolerances and the current project submission. Tensile: EN ISO 10319; O90: EN ISO 12956; normal permeability: EN ISO 11058; mass: EN ISO 9864. Fabric strength is not seam strength or allowable filling pressure.
From specification to site
Fabrication, QA/QC & African project supply
Select the finished construction
Specify bag or tube dimensions, fabric orientation, seams, ports, support and operating conditions. These fabric properties do not establish finished-container capacity.
Verify filtration
Compare the actual feed, conditioning, early filtrate, drainage and cake behaviour. A nominal opening is not an absolute particle-removal rating.
Confirm supply
Request grade-specific availability, dimensions, quantities, project location and required date. Stock and fabrication programme are confirmed in the quotation.
FAQ
Frequently asked questions
Does this grade name establish a finished-bag rating?
No. The grade identifies reference material properties. Seams, ports, geometry, filling limits and any lifting duty require assessment of the fabricated assembly.
Discuss your dewatering specification
Send the feed, volume, filtrate target, dimensions, location and programme. We will help define the next step.