Home/FlowTex Dewatering Technology • Manufactured in South Africa
FlowTex Mono 350
Published properties, selection guidance and a downloadable reference sheet for FlowTex Mono 350.
FlowTex Mono 350
Selected for your slurry. Manufactured for your project.
Consider for coarser filtration duties after confirming retention with the actual feed.
Product selection
Specifications that inform the right choice
Compare the published grades, then confirm the supplied construction and project requirements in the technical submission.
| FlowTex grade | Polymer | O90 (µm) | Normal permeability (mm/s) | Tensile MD/CD (kN/m) | CBR puncture (kN) |
|---|---|---|---|---|---|
| Mono 350 | PE | 350 | 300 | 44 / 35 | 4 |
Technical notes and test basis
Reference fabric averages. O90: EN ISO 12956; normal permeability: EN ISO 11058; tensile: EN ISO 10319; puncture: EN ISO 12236. Not finished-bag pressure, throughput or lifting ratings. O90 is not an absolute particle cut-off.
From specification to site
Fabrication, QA/QC & African project supply
Select the finished construction
Specify bag or tube dimensions, fabric orientation, seams, ports, support and operating conditions. These fabric properties do not establish finished-container capacity.
Verify filtration
Compare the actual feed, conditioning, early filtrate, drainage and cake behaviour. A nominal opening is not an absolute particle-removal rating.
Confirm supply
Request grade-specific availability, dimensions, quantities, project location and required date. Stock and fabrication programme are confirmed in the quotation.
FAQ
Frequently asked questions
Does this grade name establish a finished-bag rating?
No. The grade identifies reference material properties. Seams, ports, geometry, filling limits and any lifting duty require assessment of the fabricated assembly.
Discuss your dewatering specification
Send the feed, volume, filtrate target, dimensions, location and programme. We will help define the next step.